Irrigation Supplies & Products
-
Filter By Category
- Irrigation Supplies & Products (369)
- 12mm Hose Fittings (8)
- 13mm Fittings (17)
- 14mm Fittings (8)
- 19mm Fittings (34)
- 25mm Fittings (25)
- 4mm Fittings (14)
- Brass (18)
- Cable (9)
- Controllers (39)
- Drippers (5)
- HD Fittings (16)
- Misc. (13)
- Pipe (13)
- Poly Risers (11)
- Sprinklers (50)
- Tap Manifolds (6)
- Taps (3)
- Tavlit O-ring Threaded Fittings (13)
- Threaded Hex Fittings (25)
- Tools (8)
- Valve Boxes (6)
- Valves (28)
- Lawn Care Products (2)
- Tools & Equipment (2)
-
Filter By Stock
- In Stock (328)
Filter By Brand
- 3M (2)
- Antelco (26)
- DM Plastics (8)
- Double-lin Valves (1)
- Energizer (2)
- Galcon (2)
- Hansen (34)
- Holman (12)
- HR Products (76)
- Hunter (46)
- Neta (3)
- Orbit (9)
- Rain Bird (19)
- Rainbird (12)
- Senninger (5)
- Tavlit (10)
Hunter 4' variable nozzle
Hunter female threaded nozzle 1.2m radius fully adjustable 0-360.
Hunter 6' variable nozzle
Hunter female threaded nozzle 1.8m radius fully adjustable 0-360.
Hunter 8' variable nozzle
Hunter female threaded nozzle 2.4m radius fully adjustable 0-360.
In-Line Air Release Valve 15mm
Used to release air from the drip line when the system is turned on, eliminating any air pockets, while also allowing air to freely enter the system when it is shut down. This ensures a vacuum does not draw debris into the drip line via the drippers.
Increasing tee 13 x 19mm
Polypropylene tee designed to increase 13mm low density poly pipe to 19mm low density poly pipe.
JAB
An essential component in low pressure micro irrigation systems. Used to connect 4mm riser tube to standard low pressure tubing.
Micro Spray Punch
This Micro Spray Punch makes a 3mm hole in low density poly pipe. Used for making holes for JAB's to be inserted to connect to 4mm riser tube.
Multi Core Cable 100m x 3 cab
Multi Core Cable 3 core 100m roll. For use in automatic irrigation systems to connect solenoid valves to the controller.
Multi Core Cable 100m x 7 cab
Multi Core Cable 7 core 100m roll. For use in automatic irrigation systems to connect solenoid valves to the controller.
Multi Core Cable 3 cab PER M
Multi Core Cable 3 core per Metre. For use in automatic irrigation systems to connect solenoid valves to the controller.
Multi Core Cable 5 cab PER M
Multi Core Cable 5 core per Metre. For use in automatic irrigation systems to connect solenoid valves to the controller.
Multi Core Cable 7 cab PER M
Multi Core Cable 7 core per Metre. For use in automatic irrigation systems to connect solenoid valves to the controller.
Nut and Tail 25mm
Use these Poly Nut & Tails to connect poly pipe to a male threaded fitting. These fittings are most commonly used to connect poly pipe to a garden tap or a fitting where the pipeline needs to be easy to unscrew if needed.
O ring 10 pack
Holman O ring 10 pack. Fits most hose end fittings. Rubber O-rings are an essential component on irrigation products. Good O-rings prevent dripping connections and save water!
Orbit automatic rain/freeze sensor
Automatically prevents your sprinkler system from watering during a storm helping to conserve water. Easily mounts to different surfaces. Compatible with most major brands of 24 Volt timers.
Orbit Plastic Pipe and Tubing Cutter
The Poly Pipe Cutter is ideal for cutting poly and plastic tubing up to 30mm. The sharp, stainless steel blade easily cuts through poly, rubber, and plastic pipe without leaving burrs.
Orbit Solenoid Valve
Additional valve for Orbit Automatic Garden Watering Kit. Leakfree valve design makes it completely waterproof for uninterrupted operation. Includes timer mounting bracket.
Oscillating sprinkler
The oscillating sprinkler is often used for watering large sections of lawn or garden at the one time, it can be adjusted to accommodate various sizes. When set to the maximum coverage, (full pattern, 90° rotation) it has a maximum coverage of 200m².
Poly Click On Connector 19mm
Polypropylene click on connector for connecting 19mm Low Density Poly pipe to a male hose fitting. Perfect for connecting poly pipe to a fountain or oscillating snap on sprinkler.
Poly Snap On Connector 19mm
Polypropylene snap connector for connecting 19mm Low Density Poly pipe to a click on hose fitting. Perfect for when you are running a drip or sprinkler system but don't have access to run poly pipe all the way to your tap.
Pressure reducer 100 kpa
Antelco pressure reducer 100 kpa. 20mm Female inlet x 20mm Male outlet. Designed for low-flow micro irrigation systems. Pressure Regulators restrict the outlet pressure, optimising emitter performance.
