Rainbird 3500 rotor AS
Rainbird 3500 series gear drive 360 degree adjustable rotor sprinkler with Seal-A-Matic check valve to prevent low head drainage on sloped areas.
Rainbird 3500 series rotor sprinkler with Seal-A-Matic check valve to prevent low head drainage on sloped areas.
Low head drainage is caused by changes in elevation.Gravity forces water in the lateral line to drain out of the lowest head of the zone. Install the Rain Bird 3500 rotor with the Seal-A-Matic check valve and put an end to unnecessary water waste.
The Rain Bird Seal-A-Matic check valve holds back up to 2m of elevation pressure, sealing water in the lateral line and preventing standing water caused by low head drainage. All of the performance and reliability you expect from the leader in irrigation with the water-saving benefit of the Seal-A-Matic check valve.
- 4 in. part/full-circle pop-up rotor sprinkler with Seal-A-Matic (SAM™) check valve
- Seal-A-Matic (SAM™) check valve holds up to 7 feet (2,1m) of elevation change, to prevent puddling and erosion caused by low head drainage
- Top-adjust arc adjustment requiring only a flat-blade screwdriver
- 40- 360° Arc Part-Circle arc rotation and reversing Full-Circle rotation in one
- Attachable nozzle tree of six Rain Curtain™ nozzles
- Radius adjustment screw allows up to 35% radius reduction without changing nozzles
- Quick Check Arc/Fast Forward
- Dual action, positive stop wiper seal protects internals from debris and assures positive pop-up and retraction
- Self-adjusting stator does not require replacement when changing nozzles
- Water-lubricated gear-drive design for durable, reliable operation
- Easily removable filter screen
- Nozzle removal feature
- Arc setting factory preset at 180° for installation convenience
- Precipitation rate: .37 to .72 inches per hour
(9 to 18 mm/h)
- Radius: 15 to 35 feet (4,6 to 10,7 m)
- Radius may be reduced up to 35% with Radius Reduction Screw
- Pressure: 25-55 psi (1,7 to 3,8 Bars)
- Flow Rate: .54 to 4.6 gpm (,12 to 1,04 m 3/h)
- 1/2" NPT female bottom threaded inlet
- Reversing Full-and Part-circle adjustment 40° – 360°
- Pop-up height shrub: 4" (10,2 cm)
- Overall body height shrub: 6.6" (16,8 cm)
- Exposed surface diameter: 1.16" (2,9 cm)
- Note: Pop-up height measured from cover to center of nozzle.
Overall body height is measured popped down.
|Unit Of Measure||ea|
Be The First To Review This Product!
Help other Paul Munns Instant Lawn Adelaide users shop smarter by writing reviews for products you have purchased.