Irrigation Supplies & Products

Brass ball valve 15mm

Featuring brass construction and single lever handle operation, this 15mm ball valve is designed to control water flow, allowing water isolation and pipes/taps to be shut off at the point of the ball valve.

Cable connector

Used to electrically connect multiple wire ends and insulate the connection. With a built in moisture seal, and flame retardant capabilities this Scotchlok Insulation Displacement Connector can be used for pigtail wire splicing.

Cable Connector - Small

Use 3M Brand UAL to electrically connect two or three wire ends, insulate the connection and provide a moisture resistant seal.

Compression Coupling 20 x 20mm

HD compression fitting - 20mm x 20mm coupling. For use with 20mm high density poly pipe.

Compression Coupling 25 x 25mm

HD compression fitting - 25mm x 25mm coupling. For use with 25mm high density poly pipe.

Compression Elbow 20mm

HD compression fitting - elbow - poly x poly 20mm. For use with 20mm high density poly pipe.

Compression Elbow 25mm

HD compression fitting - elbow - poly x poly 25mm. For use with 25mm high density poly pipe.

Compression Take Off 20mm x 3/4 f

HD compression fitting - 20mm poly to 3/4" female thread. For use with 20mm high density poly pipe.

Compression Take Off 20mm x 3/4 m

HD compression fitting - 20mm poly to 3/4" male thread. For use with 20mm high density poly pipe.

Compression Take Off 25mm x 1"" f

HD compression fitting - 25mm poly to 1" female thread. For use with 25mm high density poly pipe.

Compression Take Off 25mm x 1"" m

HD compression fitting - 25mm poly to 1" male thread. For use with 25mm high density poly pipe.

Compression Tee 20mm

HD compression fitting - tee - poly x poly x poly 20mm. For use with 20mm high density poly pipe.

Compression Tee 25mm

HD compression fitting - tee - poly x poly x poly 25mm. For use with 25mm high density poly pipe.

Cut Off Riser 15mm - 65mm

This riser is made of durable polyethylene and is conveniently moulded so it can be easily cut to the desired length during installation.

DB Elbow 14mm

This quality double barbed elbow provides high retention in low pressure poly tubing for long-term reliability of connections. The DB range can be confidently installed without clamps. Perfect for Coppershield sub surface drip pipe.

DB End Plug 14mm

This quality double barbed end plug provides high retention in low pressure poly tubing for long-term reliability of connections. The DB range can be confidently installed without clamps. Perfect for Coppershield sub surface drip pipe.

DB Joiner 14mm

This quality double barbed joiner provides high retention in low pressure poly tubing for long-term reliability of connections. The DB range can be confidently installed without clamps. Perfect for Coppershield sub surface drip pipe.

DB reducing tee 19 x 14

This quality double barbed reducing tee provides high retention in low pressure poly tubing for long-term reliability of connections. The DB range can be confidently installed without clamps. Perfect for use with Coppershield sub surface drip pipe.

DB tee 14mm

This quality double barbed tee provides high retention in low pressure poly tubing for long-term reliability of connections. The DB range can be confidently installed without clamps. Perfect for use with Coppershield sub surface drip pipe.

Director 13 x 25 bsp

Polypropylene director designed to connect tubes to valves and female fittings in a low pressure irrigation system. Used in conjunction with 25mm low pressure poly tubing. Perfect for connecting 25mm solenoid valves to 13mm poly.

Director 19 x 20 bsp

19mm barb x 20mm bsp thread

Polypropylene director designed to connect tubes to valves and female fittings in a low pressure irrigation system. Used in conjunction with 19mm low pressure poly tubing.

Director 19 x 25 bsp

Polypropylene director designed to connect tubes to valves and female fittings in a low pressure irrigation system. Used in conjunction with 19mm low pressure poly tubing. Perfect for connecting 25mm solenoid valves to 19mm poly.

Director 25 x 20 bsp

Polypropylene director designed to connect tubes to valves and female fittings in a low pressure irrigation system. Used in conjunction with 25mm low pressure poly tubing.

Director 25 x 25 bsp

Polypropylene director designed to connect tubes to valves and female fittings in a low pressure irrigation system. Used in conjunction with 25mm low pressure poly tubing. Perfect for connecting 25mm solenoid valves to 25mm poly.