Irrigation Supplies & Products

Shrubler 360 Spike

The original patented Shrubbler® with flow adjustment with spike. Flow and coverage can be altered by rotating the cap.

Side outlet elbow 19 x 19

Polypropylene side outlet elbow designed to connect piping to a 20mm female threaded fitting in a low pressure irrigation system. Used in conjunction with 19mm low pressure poly tubing. Perfect for most larger gear driven rotor sprinklers.

Side outlet tee 19 x 19

Polypropylene side outlet tee designed to connect piping to a 20mm female threaded fitting in a low pressure irrigation system. Used in conjunction with 19mm low pressure poly tubing. Perfect for most larger gear driven rotor sprinklers.

Sprinkler adaptor

Allows lawn sprinklers & watering guns to be easily connected to a garden hose. The “Quick Release” snap on fitting makes installing and swapping between hose end products to your garden hose, quick & easy!

Sprinkler Surround

This sprinkler surround from HR Products is designed to surround and protect pop up sprinklers from damage.

Take off elbow 13 x 10mm

Take-Off Elbows provide an easy to install method of connecting low pressure irrigation tubing and drip lines to low density poly supply lines. Save time by punching these straight into poly pipe instead of using tees which need to by cut in and clamped.

Take off elbow 14mm

Save time by punching these straight into poly pipe instead of using tees which need to by cut in and clamped. Can be manoeuvred easily for areas where you need to run drip pipe on an angle to the supply line. Perfect for Coppershield drip pipe.

Tap adaptor 1"" x 3/4""

Tap Adaptor reducing bush 25mm BSP x 20mm BSPF with washer

Tavlit Cross F

25mm Tavlit swivel cross FFFF for building manifolds for solenoid valves. Tavlit swivel fittings enable quick, Teflon free and easy installation of water and irrigation systems.

Tavlit Cross MF

25mm Tavlit swivel cross FFFM for building manifolds for solenoid valves. Tavlit swivel fittings enable quick, Teflon free and easy installation of water and irrigation systems.

Tavlit elbow

25mm Tavlit swivel elbow for building manifolds for solenoid valves. Tavlit swivel fittings enable quick, Teflon free and easy installation of water and irrigation systems.

Tavlit nipple

25mm Tavlit nipple for connecting Tavlit fittings to solenoid valves. Tavlit swivel fittings enable quick, Teflon free and easy installation of water and irrigation systems.

Tavlit plug

25mm Tavlit swivel plug for building manifolds for solenoid valves. Tavlit swivel fittings enable quick, Teflon free and easy installation of water and irrigation systems.

Tavlit red nipple 25x20mm

25-20mm Tavlit reducing nipple for connecting Tavlit fittings to 20mm ball valves. Tavlit swivel fittings enable quick, teflon free and easy installation of water and irrigation systems.

Tavlit Tee

25mm Tavlit swivel tee for building manifolds for solenoid valves.

Thread seal tape

Thread seal tape for sealing plumbing connections and preventing water leaking from joins. 12mm x 10m.

Threaded elbow 19 x 20 bsp

Polypropylene elbow designed to connect piping to a 20mm female threaded fitting in a low pressure irrigation system. Used in conjunction with 19mm low pressure poly tubing. Perfect for larger gear driven rotor sprinklers.

Threaded elbow F 13 x 15 bspf

Polypropylene elbow designed to connect to 15mm male fittings in a low pressure irrigation system. Used in conjunction with 13mm low pressure poly tubing.

Threaded elbow F 19 x 15 bspf

Polypropylene elbow designed to connect to 15mm male fittings in a low pressure irrigation system. Used in conjunction with 19mm low pressure poly tubing.

Threaded elbow F 25 x 15 bspf

Polypropylene elbow designed to connect to 15mm male fittings in a low pressure irrigation system. Used in conjunction with 13mm low pressure poly tubing. Perfect for connecting an air release valve to your sub-surface irrigation system.

Threaded tee F 19 x 15 bspf

Polypropylene tee designed to connect to 15mm male fittings in-line in a low pressure irrigation system. Used in conjunction with 19mm low pressure poly tubing.

Threaded Tee F 25 x 15bspf

Polypropylene tee designed to connect to 15mm male fittings in-line in a low pressure irrigation system. Used in conjunction with 25mm low pressure poly tubing.

Threaded tee M 19 x 20 bsp

19mm barb x 20mm male bsp thread

Polypropylene tee designed to connect piping to a 20mm female threaded fitting in a low pressure irrigation system. Used in conjunction with 19mm low pressure poly tubing. Perfect for larger gear driven rotor sprinklers.

Uni tap adaptor

Holman universal, plastic tap adaptor (fits 20 and 25mm taps). With a 12mm male snap on fitting it is perfect for garden hoses and other 12mm fittings.