Antelco

19mm Saddle Clamp with Nail

To secure 19mm LD poly pipe to various surfaces

Suitable for 19mm LD poly pipe in low pressure irrigation systems, saddle clamps are used to secure tubing with a nail that is hammered into various materials. 

$0.70 per ea

Asta Stake Drip PC 4lph

Pressure Compensating dripper with Asta Stake 4LPH

A landscape and nursery dripper incorporating an anchoring spike that delivers precise amounts of water direct to the plant root zone. Featuring a sealed turbulent flow path and diaphragm to maintain uniform discharge rates over a wide range of pressures.

$1.85 per ea

Asta stake Drip PC 8lph

Pressure Compensating dripper with Asta Stake 8LPH

A landscape and nursery dripper incorporating an anchoring spike that delivers precise amounts of water direct to the plant root zone. Featuring a sealed turbulent flow path and diaphragm to maintain uniform discharge rates over a wide range of pressures.

$1.70 per ea

DB Elbow 14mm

This quality double barbed elbow provides high retention in low pressure poly tubing for long-term reliability of connections. The DB range can be confidently installed without clamps. Perfect for Coppershield sub surface drip pipe.

$1.05 per ea

DB End Plug 14mm

This quality double barbed end plug provides high retention in low pressure poly tubing for long-term reliability of connections. The DB range can be confidently installed without clamps. Perfect for Coppershield sub surface drip pipe.

$0.70 per ea

DB Joiner 14mm

This quality double barbed joiner provides high retention in low pressure poly tubing for long-term reliability of connections. The DB range can be confidently installed without clamps. Perfect for Coppershield sub surface drip pipe.

$0.70 per ea

DB reducing tee 19 x 14

This quality double barbed reducing tee provides high retention in low pressure poly tubing for long-term reliability of connections. The DB range can be confidently installed without clamps. Perfect for use with Coppershield sub surface drip pipe.

$1.80 per ea

DB tee 14mm

This quality double barbed tee provides high retention in low pressure poly tubing for long-term reliability of connections. The DB range can be confidently installed without clamps. Perfect for use with Coppershield sub surface drip pipe.

$1.25 per ea

Drip Emitter 8LPH

This turbulent flow path dripper is sealed to maintain pre-set discharge rates and uniformity. Can connect directly into low density poly pipe or with 4mm riser tube to extend into garden beds.

$0.65 per ea

Goof plug

These goof plugs are a great way to plug unwanted holes in drip tubing. They are also perfect for plugging holes left behind by relocated emitters when rearranging a dripper system.

$1.10 per ea

Greenback Valve 13mm

13mm, barbed in-line tap

$4.55 per ea

Greenback Valve 19mm

19mm, barbed in-line tap. On-off device to control the water flow in low pressure irrigation systems.

$8.60 per ea

Greenback Valve 25mm

25mm, barbed in-line tap. On-off device to control the water flow in low pressure irrigation systems. Perfect for use as a flushing tap in a sub-surface irrigation system.

$11.05 per ea

Nut and Tail 13mm

Nut & tail with washer 13 x 3/4"" BSPF

$2.35 per ea

Nut and Tail 19mm

Nut & tail with washer 19mm x 3/4"" BSPF

$2.70 per ea

Nut and Tail 25mm

Use these Poly Nut & Tails to connect poly pipe to a male threaded fitting. These fittings are most commonly used to connect poly pipe to a garden tap or a fitting where the pipeline needs to be easy to unscrew if needed.

$4.20 per ea

Pressure reducer 100 kpa

Antelco pressure reducer 100 kpa. 20mm Female inlet x 20mm Male outlet. Designed for low-flow micro irrigation systems. Pressure Regulators restrict the outlet pressure, optimising emitter performance.

$20.65 per ea

Pressure reducer 175 kpa

Antelco pressure reducer 175 kpa. 20mm Female inlet x 20mm Male outlet. Pressure Regulators restrict the outlet pressure, optimising emitter performance. Perfect for use with Coppershield sub surface drip systems.

$20.65 per ea

Ratchet clamp 13mm

Antelco 13mm ratchet clamp. Ratchet clamps secure polyethylene tube to a wide range of fittings.

$0.35 per ea

Ratchet clamp 14mm

Antelco 14mm ratchet clamp. Ratchet clamps secure polyethylene tube to a wide range of fittings.

$0.40 per ea

Ratchet clamp 19mm

Antelco 19mm ratchet clamp. Ratchet clamps secure polyethylene tube to a wide range of fittings.

$0.40 per ea

Shrubler 360

The original patented Shrubbler® with flow adjustment. Flow and coverage can be altered by rotating the cap. Can connect directly into low density poly pipe or with 4mm riser tube to extend into garden beds.

$0.95 per ea

Shrubler 360 Spike

The original patented Shrubbler® with flow adjustment with spike. Flow and coverage can be altered by rotating the cap.

$1.90 per ea

Take off elbow 13 x 10mm

Take-Off Elbows provide an easy to install method of connecting low pressure irrigation tubing and drip lines to low density poly supply lines. Save time by punching these straight into poly pipe instead of using tees which need to by cut in and clamped.

$0.95 per ea