The MP Tool is a convenient arc and radius adjustment tool for the MP Rotator.
200mm Pipe Stabiliser Rod. Firmly holds poly pipe in place. Suitable for all sizes of poly pipe up to 25mm.
Use the punch tool to connect your drip tubing to your 25mm poly. With this tool you will easily be able to make a perfect 10mm hole in your mainline pipe. To connect your drip pipe simply pop in a take off elbow, slide on your drip tube and clamp it on.
Hunter Key for adjusting Hunter brand sprinklers
This Micro Spray Punch makes a 3mm hole in low density poly pipe. Used for making holes for JAB's to be inserted to connect to 4mm riser tube.
The Poly Pipe Cutter is ideal for cutting poly and plastic tubing up to 30mm. The sharp, stainless steel blade easily cuts through poly, rubber, and plastic pipe without leaving burrs.
Rainbird sprinkler adjusting tool. Use to adjust and lift Rain Bird rotors including the 3500, 3500AS, 5000 & 5000 Plus models.
Weed Mat Pins 150mm deep. These weed mat pins are used for securing weed mat but are also perfect for holding poly pipe in place.