DB reducing tee 25 x 14

Barbed tee 25mm to 14mm thread

This quality double barbed reducing tee provides high retention in low pressure poly tubing for long-term reliability of connections. The DB range can be confidently installed without clamps. Perfect for use with Coppershield sub surface drip pipe.

$2.25 per ea

PVC Reducing Bush 25 x 20

For use with PVC fittings

Used to connect lengths of PVC pipe.

$2.00 per ea

PVC Valve Adaptor 25mm x 1" M

For use with PVC fittings

For use with PVC fittings

$3.15

Reducing elbow 25 x 13

Polypropylene elbow designed to reduce 25mm low density poly pipe to 13mm low density poly pipe.

$1.80 per ea

Reducing tee 25 x 13mm

Polypropylene tee designed to reduce 25mm low density poly pipe to 13mm low density poly pipe.

$1.30 per ea

Side outlet elbow 25 x 15 bsp

Polypropylene side outlet elbow designed to connect piping to a 15mm female threaded fitting in a low pressure irrigation system. Used in conjunction with 25mm poly tubing. Perfect for most spray pop up sprinklers and small gear driven rotor sprinklers.

$5.35 per ea

Side outlet elbow 25 x 19 bsp

Perfect for most larger gear-driven rotor sprinklers

Polypropylene side outlet elbow designed to connect piping to a 20mm female threaded fitting in a low pressure irrigation system. Used in conjunction with 25mm low pressure poly tubing. Perfect for most larger gear driven rotor sprinklers.

$5.80 per ea

Side Outlet Tee M 25 x 15 bsp

Polypropylene side outlet tee designed to connect piping to a 15mm female threaded fitting in a low pressure irrigation system. Used with 25mm low pressure poly tubing. Perfect for most spray pop up sprinklers and small gear driven rotor sprinklers.

$6.20 per ea

Threaded Elbow M 25 x 15 bsp

25m barb 15mm male bsp thread

Polypropylene elbow designed to connect piping to a 15mm female threaded fitting in a low pressure irrigation system. Used in conjunction with 25mm low pressure poly tubing. Perfect for most spray pop up sprinklers and small gear driven rotor sprinklers.

$2.70 per ea

Threaded Tee M 25 x 15 bsp

Polypropylene tee designed to connect to 15mm male fittings in-line in a low pressure irrigation system. Used in conjunction with 25mm low pressure poly tubing.

$2.95 per ea

Joiner 25mm

Polypropylene joiner designed to connect piping in a low pressure irrigation system. Used in conjunction with 25mm low pressure poly tubing.

$1.30 per ea

Plain elbow 25mm

Polypropylene elbow designed to divert water through a low pressure irrigation system. Used in conjunction with 25mm low pressure poly tubing.

$1.40 per ea

Plain tee 25mm

Polypropylene tee designed to divert water through a low pressure irrigation system. Used in conjunction with 25mm low pressure poly tubing.

$1.65 per ea

Director 25 x 20 bsp

Polypropylene director designed to connect tubes to valves and female fittings in a low pressure irrigation system. Used in conjunction with 25mm low pressure poly tubing.

$1.50 per ea

Director 25 x 25 bsp

Polypropylene director designed to connect tubes to valves and female fittings in a low pressure irrigation system. Used in conjunction with 25mm low pressure poly tubing. Perfect for connecting 25mm solenoid valves to 25mm poly.

$1.55 per ea

End plug 25mm

Polypropylene end plug designed to terminate water supply in a low pressure irrigation system. Used in conjunction with 25mm low pressure poly tubing.

$1.40 per ea

Greenback Valve 25mm

25mm, barbed in-line tap. On-off device to control the water flow in low pressure irrigation systems. Perfect for use as a flushing tap in a sub-surface irrigation system.

$11.05 per ea

Nut and Tail 25mm

Use these Poly Nut & Tails to connect poly pipe to a male threaded fitting. These fittings are most commonly used to connect poly pipe to a garden tap or a fitting where the pipeline needs to be easy to unscrew if needed.

$4.20 per ea

Ratchet clamp 25mm

19mm ratchet clamp. Ratchet clamps secure polyethylene tube to a wide range of fittings.

$0.85 per ea

Reducing elbow 25 x 19

Polypropylene elbow designed to reduce 25mm low density poly pipe to 19mm low density poly pipe.

$3.30 per ea

Reducing joiner 25 x 13mm

Polypropylene joiner designed to connect 25mm low density poly pipe to 13mm low density poly pipe. Used in conjunction with 13mm and 25mm low pressure poly tubing.

$1.80 per ea

Reducing Joiner 25 x 19mm

Polypropylene joiner designed to connect 25mm low density poly pipe to 19mm low density poly pipe. Used in conjunction with 19mm and 25mm low pressure poly tubing.

$1.15 per ea

Reducing tee 25 x 19mm

Polypropylene tee designed to reduce 25mm low density poly pipe to 19mm low density poly pipe.

$2.10 per ea

Threaded elbow F 25 x 15 bspf

Polypropylene elbow designed to connect to 15mm male fittings in a low pressure irrigation system. Used in conjunction with 13mm low pressure poly tubing. Perfect for connecting an air release valve to your sub-surface irrigation system.

$2.75 per ea